Honda Fireblade SP 2027: a new generation shaped by the track
Honda gives the Fireblade SP a lighter frame, electronic Öhlins suspension, a revised intake and an HRC WORKS Edition.
Honda has unveiled the 2027 Fireblade SP at EICMA 2026, alongside the CBR1000RR-R Fireblade HRC WORKS Edition. The revision reaches far beyond styling: roughly 75% of the components were designed from scratch, while HRC expertise helped define a motorcycle intended first as a foundation for racing use. That priority is reflected in the chassis, engine and electronic systems.
A lighter chassis and electronically managed Öhlins
The new aluminium frame is 440 grams lighter than its predecessor. Honda has reduced lateral stiffness by 20% but left torsional stiffness unchanged, a combination intended to improve feedback from the front wheel at high lean angles. The swingarm is lighter too.
The SP uses electronically controlled Öhlins suspension, with a 43 mm NPX inverted fork and a TTX36 rear shock. Riders can alter the settings through the motorcycle’s menu without tools. The wheels and 330 mm front discs have also been lightened, and braking is handled by Brembo Hypure callipers.
Variable intake hardware and a wider electronic toolbox
The 999 cc inline-four produces 114 Nm of maximum torque. Its intake system uses two-stage variable-length funnels. Once engine speed rises above 11,750 rpm, the upper part separates from the lower section. The stated aim is stronger performance through the midrange while preserving the engine’s high-rpm character. The electronic throttle uses two motors, while magnesium engine covers and aluminium bolts help reduce weight. First gear is 5% longer, and the exhaust end section is supplied by Akrapovič.
Honda developed the fairing with HRC, retaining the previous Fireblade’s downforce in a cleaner design. The fuel tank is titanium, the LED headlight includes daytime running lights and the seat is higher than before. A six-axis inertial measurement unit supports the electronics, which are accessed through three riding modes and a 5-inch TFT display. Power, engine braking, wheelie control and traction control have separate adjustments, while the steering damper offers three levels.
The HRC WORKS Edition and WorldSBK homologation
The HRC WORKS Edition is the model Honda uses for homologation in the World Superbike Championship. It is a single-seater fitted with carbon-fibre winglets, a carbon-fibre front mudguard and a carbon-fibre rear duct. Unlike the SP, its Öhlins suspension is mechanically adjustable and it uses Brembo Hypure Sports callipers. Despite its race-oriented specification, it remains a road-registered motorcycle subject to the regulations of each market.
THE STORY IN PHOTOS
5 photos
THE EVIDENCE BEHIND THE STORY
Sources
Spotted something that needs correcting? Contact the editorial team




