CFMOTO 550MT-X: a bigger engine and longer-travel chassis
Presented as a 2027 model, the 550MT-X raises output to 54 CV, adds suspension travel and brings more electronics to CFMOTO’s small adventure-bike formula.
CFMOTO has presented the 550MT-X at EICMA as a more substantial evolution of the 450MT. The formula remains recognisable—a parallel twin, 21-inch front and 18-inch rear spoked wheels, KYB suspension and an off-road-focused adventure layout—but the new motorcycle adds engine capacity, suspension travel, ground clearance and electronic equipment. It is intended to address the areas where the smaller model had the most obvious room for improvement, without moving into the size and power territory of a maxi-enduro.
More capacity, power and torque
The parallel-twin engine keeps its 270-degree crankshaft arrangement, while displacement grows from 449.5 cc in the 450MT to 527 cc in the 550MT-X. CFMOTO declares 54 CV at 8,500 rpm and 52 Nm at 6,000 rpm for the new model. Those figures represent increases of approximately 30% in power and 24% in torque over the 450MT. On the road, that extra margin is expected to make acceleration and overtaking less demanding, while also allowing more relaxed progress on motorway transfers, climbs or journeys carrying luggage.
Longer-travel KYB suspension
The chassis receives a similarly meaningful upgrade. The 550MT-X uses fully adjustable KYB suspension with 230 mm of front travel and 220 mm at the rear. The 450MT has 200 mm at both ends, so the new motorcycle offers additional wheel movement when dealing with rough ground and larger obstacles. Ground clearance also rises from approximately 220 mm to 250 mm. The 21-inch front and 18-inch rear spoked wheels remain unchanged in size, preserving the basic off-road approach of the 450MT.
CFMOTO gives the 550MT-X a dry weight of 172 kg and a running-order weight of 183 kg. These figures are not directly comparable with the 450MT unless the weighing conditions are the same, but they are notable in the context of the larger engine and revised suspension package. The motorcycle also gains switchable traction control and an Off-road mode. That mode allows the rider to deactivate the rear ABS and traction control when the surface calls for a less restricted setup. A bidirectional quickshifter is standard, while a new vertical 6.2-inch TFT display handles the instrumentation.
A sharper front-end identity
The styling remains clearly related to the 450MT, although the front of the 550MT-X is visibly different. Instead of the 450MT’s LED signature passing through the tower between two overlapping optical units, the new motorcycle places two headlights beneath a single clear cover. The daytime running light sits lower, giving the front a more compact and vertically pronounced appearance with stronger rally-bike cues. The side section keeps the general proportions of the smaller model but looks slimmer and more uniform. At the rear, the overall layout remains familiar, while some sections of the subframe are concealed behind plastic panels.
Some practical specifications remain provisional. Initial figures indicate a 16-litre fuel tank and a seat adjustable between 830 and 850 mm, but both values are still subject to confirmation in the final specifications. Even with that qualification, the 550MT-X represents more than a simple capacity increase: it combines a 527 cc engine with longer-travel suspension, 250 mm of ground clearance and a broader electronic package while retaining the wheel sizes and general accessibility that define the 450MT concept.
THE STORY IN PHOTOS
3 photos
THE EVIDENCE BEHIND THE STORY
Sources
Spotted something that needs correcting? Contact the editorial team


